Definition：
It is to place the
waterproof layer under the insulation layer, providing sufficient protection to
the waterproof layer, significantly reducing the temperature change on the
surface of the waterproof layer, avoiding damage caused by temperature changes,
external or human impact damage, and protecting the waterproof layer from
ultraviolet radiation, providing good waterproof and insulation functions for
buildings..
Definition：
The planted roof has all the advantages of the general inverted roof, which increases the green area, builds a natural and comfortable living environment, reduces and delays the runoff emissions caused by urban rainstorm, reduces the urban heat island effect, and further realizes building energy conservation and air purification, and improves air quality
Definition：
1.Construction is simple, fast, light roof system, low cost, especially suitable for large light steel structure roof.
2.Fully compatible with thermoplastic polyolefin (TPO/FPO) rolls or polyvinyl chloride (PVC) waterproof rolls without backing.
3.White TPO/FPO rools or PVC coil with backing can be separated without another steam layer, and Fuda XPS board and calcium silicate board are prefabricated in the factory, convenient and fast construction.
4.The use of Fuda XPS board in the steel structure roof or wall can not only enhance the durability of thermal insulation, avoid cold condensation phenomenon, but also enhance the structure's fastness, sound insulation and noise reduction function. In terms of cost performance, it is more economical to adapt than other materials.
5.Suitable for food,
electronics, light industry, textile and other industries plant roof, no
moisture absorption, no dust.
Definition：
Based on the excellent
waterproof performance and durability of TPO waterproof sheet, the distributed
photovoltaic power generation system is directly installed on the single layer
flexible roof of TPO. The round tube short column reserved on the roof is used
as the base of the photovoltaic system, the steel plate + steam insulation
layer +XPS board + Inorganic fireproof board +TPO sheet is set on the purlin,
and the photovoltaic bracket and photovoltaic panel are set up on the base.
